Updated: December 25, 2017
CSM OOO DRIVER 's ultimate point Part 2: Trigger, scan, and shouting voice
Goto-kun! Merry Christmas!! That's wonderful!
Hello everyone, this is Funasen.
How did you spend your Christmas?
I played with the Chara Deco "Santa Claus Full Bottle" and the candy toy "Cake Full Bottle", saying things like "Holy messenger, Merry Christmas!" Yay...
Well, today we will be introducing the ultimate points of OOO DRIVER.
Following on from last time, today we will be introducing the features of "Auscanner" in terms of medal scanning.
The O-Scanner is designed so that while you press the trigger button in the recess, a standby sound is played and you can scan medals during that time. I think it depends on the person whether they keep holding the trigger after scanning the medal or release it.
With this CSM, we will incorporate a specification that changes subsequent behavior depending on whether the trigger is being held at this time.
What it is like is,
"Scan three OOO DRIVER medals" -> "If you keep holding the trigger after the "kin kin kin zukyun" sound has finished playing, the transformation sound will not play" -> "When you release the trigger, the transformation sound will play"
We will have a program called:
What this allows you to do is recreate a sequence that is often seen in the movie, where after the scanning is finished, you shout "Transform!" and the transformation sound plays after you bring the Auscanner in front of your chest!
Conversely, if you release the trigger while the "kin kin kin zukyun" sound is being heard, the transformation sound will play immediately, just like in DX.
This is a production that allows you to control the timing of your transformation, which will vary depending on the episode of the show.
By the way, this program also works in "Buddy Voice Mode," and when you release the trigger after scanning, you'll hear Eiji's line "Transform!", followed by the transformation sound.
Also, as I explained in my previous blog, there is an effect where you can press the dialogue button to say "Transform!" during the standby sound, so we are currently working hard to develop a program that will prevent the line "Transform" from being said twice.
This is a bit of a spoiler, but in the movie "Heisei Generations FINAL," when Eiji transforms into the Tatoba Combo, there is a very large pause after the scanning before he shouts, "Transform!"
It will also be possible to perform transformation movements that take into account the timing of such emotions!
That concludes today's introduction to the CSM OOO DRIVER features!
One more thing: today at 11pm is the reservation deadline for the "DX KAMEN RIDER EX-AID Memorial Finish Gashat Set II"!
Those who pre-ordered the first batch should start receiving their products this weekend.
Those who have already played it will be surprised by the volume of content when they try it out!!!
I used up about 99.6% of the audio capacity of the program and added the dialogue.
We are currently working hard on this second edition, aiming for the same level of quality! Depending on the item, there will be differences in the amount of voice content that is originally included, which will result in differences in the number of lines, but even so, we are confident that this will be an absolutely fun toy! We look forward to your reservations!
Well, for the first Memorial Gashat, we have included three lines that you will want to hear along with the "Hōjō Emu!" from the "Henshin Pad DX Gashacon Bugvisor II New Dan Kuroto ver."
Although they are not included as an official linked gimmick, we have seen many people playing them at the same time to recreate a scene.
The Memorial Gashat's top priority as a product was to pursue ease of play with both the Gashat alone and GAMER DRIVER, so we decided on the time reset and how long it would last.
We have received feedback that playing the Bugvisor at the same time is a bit difficult, so we thought we'd post about this on our blog to help with the playback strategy.
Try the challenge using the method below!
"Let's make your dreams last with the Gashacon Bugvisor II New Dan Kuroto ver. and Memorial Finish Gashat Set!"
1. Press the A button on the Bugvisor II and let it play up to "Line 19."
② Press the Taddle Quest and Bang Bang Shooting buttons to hear Taddle's "Line 18",
We proceed while adjusting so that Bang Bang's "Line 16" is played at the same timing.
3. Immediately after the above sounds of Taddle and Bang Bang are heard, press the B button on the Bugvisor II.
→Press the A button to start playing the "Hojo Emu!" audio!
④When the time comes, press the appropriate Taddle Quest and Bang Bang Shooting buttons.
Play "Don't say any more!" and "Stop it!"
⑤After some bang bang shooting, it's time to prepare Mighty Action X.
Hold the Gashat in your left hand, cover the speaker hole with your palm, put your hands around your waist and press the button behind your back 13 times!
The volume of the Bugvisor II is so loud that you will hardly be able to hear Mighty's voice.
Alternatively, you can take a folded bath towel and stick your hand in it to ring the device, and you won't be able to hear any sound at all.
⑥And lastly, after Kuroto finishes laughing, press the Mighty Action X button.
It will ring "Am I addicted to games?" You can ring it right after the laugh, or you can wait for a while after Parado's movement.
It takes a bit of technique, but once you've done it a few times you'll get the hang of it and it'll become easy. In fact, just like Ex-Aid, treat this as a "game" and try to clear the game using the "strategy" above!
You should be able to operate it by yourself, but it might be fun to try playing with two people for some extra power, or even with four people playing at the same time.
Finally, the reservation deadline for the "DX 5 Legendary Rider Full Bottle Set" is fast approaching on December 27th.
Although it does not have a foam, it is a special bottle that emits a special best match sound. Not only for those who own the Ex-Aid Full Bottle, but also for all Legend Rider fans, don't miss it!
*The sale of the Ex-Aid Full Bottle has ended as of today. Thank you for your understanding.
That's all for today.
The next update will be on Tuesday, January 9th, 2018, after the New Year holidays.
Thank you very much to everyone for enjoying the CSM series and KAMEN RIDER BUILD and Ex-Aid toys this year!
Your feedback has been a great help in the development.
If you have some time to relax during the New Year holidays, we would be happy if you could take the time to play with our Rider toys from time to time.
Well then, everyone,Have a good ending.Happy New Year!!!
Hello everyone, this is Funasen.
How did you spend your Christmas?
I played with the Chara Deco "Santa Claus Full Bottle" and the candy toy "Cake Full Bottle", saying things like "Holy messenger, Merry Christmas!" Yay...
Well, today we will be introducing the ultimate points of OOO DRIVER.
Following on from last time, today we will be introducing the features of "Auscanner" in terms of medal scanning.
The O-Scanner is designed so that while you press the trigger button in the recess, a standby sound is played and you can scan medals during that time. I think it depends on the person whether they keep holding the trigger after scanning the medal or release it.
With this CSM, we will incorporate a specification that changes subsequent behavior depending on whether the trigger is being held at this time.
What it is like is,
"Scan three OOO DRIVER medals" -> "If you keep holding the trigger after the "kin kin kin zukyun" sound has finished playing, the transformation sound will not play" -> "When you release the trigger, the transformation sound will play"
We will have a program called:
What this allows you to do is recreate a sequence that is often seen in the movie, where after the scanning is finished, you shout "Transform!" and the transformation sound plays after you bring the Auscanner in front of your chest!
Conversely, if you release the trigger while the "kin kin kin zukyun" sound is being heard, the transformation sound will play immediately, just like in DX.
This is a production that allows you to control the timing of your transformation, which will vary depending on the episode of the show.
By the way, this program also works in "Buddy Voice Mode," and when you release the trigger after scanning, you'll hear Eiji's line "Transform!", followed by the transformation sound.
Also, as I explained in my previous blog, there is an effect where you can press the dialogue button to say "Transform!" during the standby sound, so we are currently working hard to develop a program that will prevent the line "Transform" from being said twice.
This is a bit of a spoiler, but in the movie "Heisei Generations FINAL," when Eiji transforms into the Tatoba Combo, there is a very large pause after the scanning before he shouts, "Transform!"
It will also be possible to perform transformation movements that take into account the timing of such emotions!
That concludes today's introduction to the CSM OOO DRIVER features!
One more thing: today at 11pm is the reservation deadline for the "DX KAMEN RIDER EX-AID Memorial Finish Gashat Set II"!
Those who pre-ordered the first batch should start receiving their products this weekend.
Those who have already played it will be surprised by the volume of content when they try it out!!!
I used up about 99.6% of the audio capacity of the program and added the dialogue.
We are currently working hard on this second edition, aiming for the same level of quality! Depending on the item, there will be differences in the amount of voice content that is originally included, which will result in differences in the number of lines, but even so, we are confident that this will be an absolutely fun toy! We look forward to your reservations!
Well, for the first Memorial Gashat, we have included three lines that you will want to hear along with the "Hōjō Emu!" from the "Henshin Pad DX Gashacon Bugvisor II New Dan Kuroto ver."
Although they are not included as an official linked gimmick, we have seen many people playing them at the same time to recreate a scene.
The Memorial Gashat's top priority as a product was to pursue ease of play with both the Gashat alone and GAMER DRIVER, so we decided on the time reset and how long it would last.
We have received feedback that playing the Bugvisor at the same time is a bit difficult, so we thought we'd post about this on our blog to help with the playback strategy.
Try the challenge using the method below!
"Let's make your dreams last with the Gashacon Bugvisor II New Dan Kuroto ver. and Memorial Finish Gashat Set!"
1. Press the A button on the Bugvisor II and let it play up to "Line 19."
② Press the Taddle Quest and Bang Bang Shooting buttons to hear Taddle's "Line 18",
We proceed while adjusting so that Bang Bang's "Line 16" is played at the same timing.
3. Immediately after the above sounds of Taddle and Bang Bang are heard, press the B button on the Bugvisor II.
→Press the A button to start playing the "Hojo Emu!" audio!
④When the time comes, press the appropriate Taddle Quest and Bang Bang Shooting buttons.
Play "Don't say any more!" and "Stop it!"
⑤After some bang bang shooting, it's time to prepare Mighty Action X.
Hold the Gashat in your left hand, cover the speaker hole with your palm, put your hands around your waist and press the button behind your back 13 times!
The volume of the Bugvisor II is so loud that you will hardly be able to hear Mighty's voice.
Alternatively, you can take a folded bath towel and stick your hand in it to ring the device, and you won't be able to hear any sound at all.
⑥And lastly, after Kuroto finishes laughing, press the Mighty Action X button.
It will ring "Am I addicted to games?" You can ring it right after the laugh, or you can wait for a while after Parado's movement.
It takes a bit of technique, but once you've done it a few times you'll get the hang of it and it'll become easy. In fact, just like Ex-Aid, treat this as a "game" and try to clear the game using the "strategy" above!
You should be able to operate it by yourself, but it might be fun to try playing with two people for some extra power, or even with four people playing at the same time.
Finally, the reservation deadline for the "DX 5 Legendary Rider Full Bottle Set" is fast approaching on December 27th.
Although it does not have a foam, it is a special bottle that emits a special best match sound. Not only for those who own the Ex-Aid Full Bottle, but also for all Legend Rider fans, don't miss it!
*The sale of the Ex-Aid Full Bottle has ended as of today. Thank you for your understanding.
That's all for today.
The next update will be on Tuesday, January 9th, 2018, after the New Year holidays.
Thank you very much to everyone for enjoying the CSM series and KAMEN RIDER BUILD and Ex-Aid toys this year!
Your feedback has been a great help in the development.
If you have some time to relax during the New Year holidays, we would be happy if you could take the time to play with our Rider toys from time to time.
Well then, everyone,
share
Related topics
Related products
