PROJECT R.E.D. &
Super Sentai toy website

Hello everyone!
I'm in charge of development for the Dyno Buckler!

This time, we are currently accepting reservations"ダイノバックラー -MEMORIAL EDITION-"We'll be sharing details about the product's appeal and development secrets that we couldn't fully cover on the order page!


• Exterior



First, let's look at the product's appearance. This time, we focused on recreating the Dino Buckler as it appears in the show as closely as possible during development. For this reason, we intentionally left the screw holes for the battery cover visible on the back as they are, and the gold part in the center is also reproduced with a sticker, just like in the show and the DX version! We are currently making adjustments to get as close as possible to the color of the gold sticker in the show.



The screw holes are reused as screws for the battery cover. The grip opens with a satisfying click, making you want to move it again and again! Also, the button for extending the fangs is a red switch, just like in the movie.

Regarding the five included medals, the original DX version had plated medals that were very vibrant and beautiful, but this time, in order to match the appearance in the show, we've used a matte gold with a slightly less glossy finish and weathering paint. We are currently working hard to adjust the colors to give them a calm and sophisticated look.



We kept the size in mind, matching the DX version of the Dino Buckler, as seen in the show. The original Dino Buckler only produced one electronic sound, so a very thin speaker was sufficient. However, to output various sounds like recent Sentai toys, a speaker with a certain thickness is necessary. But due to the constraint of having to match the size of the DX version, we had a lot of trouble implementing the speaker in the internal structure... Furthermore, there were many difficult challenges, such as implementing new parts like the BGM button, power switch, and detection switch, and reconfiguring the internal structure and gimmicks to take them into consideration. However, with the cooperation of the design team, we were somehow able to implement the desired specifications in a size equivalent to the DX version.



Regarding the batteries, in order to improve the electrical specifications such as sound, light, and various sensors, the two LR44 batteries used in the DX version were insufficient, so we switched to AAA batteries. I can't go into detail here, but a lot of technological brilliance is packed into this little Dino Buckler...!

• Light-up gimmick
The original DX version had four LEDs on the top, bottom, left, and right of the medal set section, but this time...Approximately 3 timesThis will be13 LEDsIt uses this technology to create a light-emitting effect!
The nine LEDs are arranged around the circumference of the medal set, creating a dynamic light effect that resembles the glowing effects seen in the film, where light leaks from the medals and traces an arc.



Also, in the show, just before the upper and lower parts of the Dino Buckler unfold, the crack briefly lights up, and this is represented using the remaining four LEDs. We have recreated a transformation effect close to that seen in the show using 13 LEDs!



• NARIKIRI playing
We're still going!
To allow for a more accurate transformation into the Zyurangers, we have newly developed this.Motion detection sensorsIt is equipped with a system that, when you pull the buckler back onto your waist, produces the memorable "whoosh" sound of swinging your arm during the transformation. This sound is very memorable in the transformation scene in the show, and we wanted to include it from the beginning of development. However, adjusting the sensitivity of the sensor was difficult; increasing the sensitivity would cause it to react to unintended movements, and decreasing the sensitivity would cause it to not react when intended. We were particularly worried about the movement from pulling it back onto the waist to thrusting it forward. In the show, after pulling the buckler back, another "whoosh" sound is played when you thrust your arm forward, and then a "click" sound is played when you rotate the buckler. To make this smooth, we have made it so that the sound of the buckler rotating is played automatically when the sensor reacts the first time. It will feel like you are trying to match your movements to the sound, but since there are no malfunctions due to the sensor, we think you will be able to fully NARIKIRI in the role!



Furthermore, this timeA detection switch is located on the rotation axis of the grip.I've included it. This also creates a very distinctive "whining" sound when I raise the grip from the buckler that's tucked into my waist...! The Dino Buckler's transformation wouldn't begin without this sound! Lol



This time, we've incorporated a sensor that reads the movements during transformation, and we've used this sensor to implement the "knuckle mode" that Boy and Mei used in episode 3, where they used the Dino Buckler like brass knuckles!
The attack sound is activated by gripping the Dino Buckler and thrusting your fist forward.
This mode allows you to recreate that precious episode where the two characters, who hadn't yet obtained the legendary weapon, were using it as their weapon!


• Robot Appearance Mode



Furthermore, we have added a new mode that features Daizyujin, which was not present in previous Dino Buckler models.
The sound effects include the scene where the Zyurangers take medals out of their Dino Bucklers after transforming and turn them into Dino Crystals! The way the medals turn into control levers is really cool!
This Dino Crystal is the catalyst for the transformation and combination into Dino Tanker and then into Daizyujin, so the combination sound is also included. If you own the Daizyujin toy or the DXROBO UNIVERSE DAIZYUJIN, be sure to enjoy playing the combined Dino Mission along with the combination sound that plays from the Dino Buckler!



(Currently, " DXROBO UNIVERSE ブラック大獣神 " is also available for pre-order at PREMIUM BANDAI !)

• others recorded audio

First up is the startup sound when you turn it on! This is the first sound you'll hear when playing with this product, so it's very important, and I agonized over what would be best. In the end, I thought it would be great if the startup sound reminded you of your memories of watching Zyuranger.The sound that plays during the scene where the program logo lights up before the opening is the startup sound.It's the scene where the program logo, which is designed to resemble a stone monument, rises up and then changes color!



And an essential element of a dinosaur sentai team is the roar of the guardian beasts. This product features individual transformation modes, and after transformation...The roars of each guardian beast play.This product features a special design! In episode 11 and beyond of the main series, the medals glow gold as the warriors transform, accompanied by the roars of their guardian beasts. However, the sounds were similar and difficult to distinguish. Therefore, this product includes the roars of each guardian beast used in the introduction scene in episode 1. This makes the differences between the five roars easier to discern, and since this product features a light-up design that evokes the transformations in the first half of the series, up to episode 11, we decided to use this design. It's only the roars that are different, but it's sure to make you feel like your favorite warrior!


We've covered the specifications of the "ダイノバックラー -MEMORIAL EDITION-" up to this point!
In this Reiwa era, the newly evolved Dyno Buckler has finally been commercialized!
I would be delighted if you would pick it up and experience the transformation!

"ダイノバックラー -MEMORIAL EDITION-"
Reservations are being accepted until June 25, 2025!!