developer blog
Updated: March 4, 2019
Control the timing of CSM BLAYBACKLE element illumination and extinguishing!
Hello everyone!
I'm Funasen, in charge of development.
March! !
Today on the CSM blog, we would like to introduce two additional features for "BLAYBACKLE"!
■The timing of the sound of entering the Orichalcum element can be adjusted to your liking!
Transformation into KAMEN RIDER Blade:
"Turn up" -> "Irradiate the Orichalcum element" -> "Introduce the irradiated Orichalcum element and transform"
It is composed of the following flow.
In most scenes in the film, the transformation was instantaneous, with almost no time between irradiation and penetration.
In CSM, the transformation sounds are structured to recreate the tempo found in the movie.
The distribution is about 2 seconds for the irradiation sound and about 2 seconds for the entry sound (the same as the DX transformation sound).
Therefore, the irradiation time of the linked projector is about 4 seconds.
In previous CSM versions, I think the length of the transformation sound would have been fine.
However, this time the Orichalcum Element is designed to be actually projected, so if you shine it onto something like a noren curtain and try to actually thrust it through, the thrust sound will play before your body reaches the curtain.
I believe this is a feeling of discomfort that arises from "actual projection" and has never existed in previous CSMs.
Well, we have to solve that problem! So...
"Plays the Orichalcum Element irradiation sound, projects it with the projector, and then plays the charge sound at the desired timing when you press a button."
We have made it possible!
To be specific, the steps are as follows:
① When you hold down the dialogue button before transforming, the system voice for the Blay Rouser will say "Change."This is the signal that the character is in standby for the optional transformation.
② After the above, put on the belt and turn it up. Then, the sound of the Orichalcum element emitting light will not end in 2 seconds, but will continue to emit light for a long time. (It's like the sound in the first episode of the main story.)During this time, the projector will continue to emit light.
③ After that, just press the "dialogue button" when it's time for you to charge in.When you press it, the "charge sound" will play and the projector will turn off.
This is the flow.
We hope you will enjoy playing with the transformation toys in conjunction with yourself and the projector.
continue,
■Features "Decade version of Kazuma Kenzaki mode"!
Kazuma Kenzaki appeared in episode 31 of "MASKED RIDER DECADE." It is not known whether he is the same Kazuma Kenzaki from the main story of "MASKED RIDER BLADE," but he was certainly different.
It was also quite unique that he could transform directly into King Form.
Considering the unique nature of this BLAYBACKLE, we decided to change the transformation sound and dialogue button content to the Decade version by activating it in a different mode.
The method is the same as what is commonly done in recent CSMs: press a certain button while turning the power switch ON.
This time, when you start the app while pressing the "dialogue button", it will transition to this "Decade Mode".
Doing this will change the startup sound to DECADRIVER 's "Blade" sound.
When you press the "Dialogue Button", the audio that is played will change to the lines from "Decade", and the transformation sound will change to the direct transformation sound into King Form that was depicted in episode 31 of "MASKED RIDER DECADE".
Also, in this story, Kazuma Kenzaki transforms twice, and each time the transformation sounds are different, so we made it possible to play both.
The two transformation sounds alternate, so if you untransform and then transform again without turning off the power, the sound will change.
*However, please note that the Orichalcum elements projected by the projector will remain blue, not gold.
That's all from CSM.
Finally, the "HENSHIN BELT DX Mirai Driver Set," which is currently accepting preorders on PREMIUM BANDAI, has started its second round of preorders today.
Delivery will be in August. We look forward to your continued reservations!
That's all for today's blog.
The next update will be on Monday, March 11th.
March 11th is the final day for pre-orders for the "CSM BLAYBACKLE & Rouse Absorber & Bray Rouser."
For those who are undecided about whether to purchase, we would like to provide you with further information on additional specifications!
See you next time!
I'm Funasen, in charge of development.
March! !
Today on the CSM blog, we would like to introduce two additional features for "BLAYBACKLE"!
■The timing of the sound of entering the Orichalcum element can be adjusted to your liking!
Transformation into KAMEN RIDER Blade:
"Turn up" -> "Irradiate the Orichalcum element" -> "Introduce the irradiated Orichalcum element and transform"
It is composed of the following flow.
In most scenes in the film, the transformation was instantaneous, with almost no time between irradiation and penetration.
In CSM, the transformation sounds are structured to recreate the tempo found in the movie.
The distribution is about 2 seconds for the irradiation sound and about 2 seconds for the entry sound (the same as the DX transformation sound).
Therefore, the irradiation time of the linked projector is about 4 seconds.
In previous CSM versions, I think the length of the transformation sound would have been fine.
However, this time the Orichalcum Element is designed to be actually projected, so if you shine it onto something like a noren curtain and try to actually thrust it through, the thrust sound will play before your body reaches the curtain.
I believe this is a feeling of discomfort that arises from "actual projection" and has never existed in previous CSMs.
Well, we have to solve that problem! So...
"Plays the Orichalcum Element irradiation sound, projects it with the projector, and then plays the charge sound at the desired timing when you press a button."
We have made it possible!
To be specific, the steps are as follows:
① When you hold down the dialogue button before transforming, the system voice for the Blay Rouser will say "Change."This is the signal that the character is in standby for the optional transformation.
② After the above, put on the belt and turn it up. Then, the sound of the Orichalcum element emitting light will not end in 2 seconds, but will continue to emit light for a long time. (It's like the sound in the first episode of the main story.)During this time, the projector will continue to emit light.
③ After that, just press the "dialogue button" when it's time for you to charge in.When you press it, the "charge sound" will play and the projector will turn off.
This is the flow.
We hope you will enjoy playing with the transformation toys in conjunction with yourself and the projector.
continue,
■Features "Decade version of Kazuma Kenzaki mode"!
Kazuma Kenzaki appeared in episode 31 of "MASKED RIDER DECADE." It is not known whether he is the same Kazuma Kenzaki from the main story of "MASKED RIDER BLADE," but he was certainly different.
It was also quite unique that he could transform directly into King Form.
Considering the unique nature of this BLAYBACKLE, we decided to change the transformation sound and dialogue button content to the Decade version by activating it in a different mode.
The method is the same as what is commonly done in recent CSMs: press a certain button while turning the power switch ON.
This time, when you start the app while pressing the "dialogue button", it will transition to this "Decade Mode".
Doing this will change the startup sound to DECADRIVER 's "Blade" sound.
When you press the "Dialogue Button", the audio that is played will change to the lines from "Decade", and the transformation sound will change to the direct transformation sound into King Form that was depicted in episode 31 of "MASKED RIDER DECADE".
Also, in this story, Kazuma Kenzaki transforms twice, and each time the transformation sounds are different, so we made it possible to play both.
The two transformation sounds alternate, so if you untransform and then transform again without turning off the power, the sound will change.
*However, please note that the Orichalcum elements projected by the projector will remain blue, not gold.
That's all from CSM.
Finally, the "HENSHIN BELT DX Mirai Driver Set," which is currently accepting preorders on PREMIUM BANDAI, has started its second round of preorders today.
Delivery will be in August. We look forward to your continued reservations!
商品情報
That's all for today's blog.
The next update will be on Monday, March 11th.
March 11th is the final day for pre-orders for the "CSM BLAYBACKLE & Rouse Absorber & Bray Rouser."
For those who are undecided about whether to purchase, we would like to provide you with further information on additional specifications!
See you next time!
商品情報
商品情報
share
Related topics
Related products
