KAMEN RIDER TOY WEB

BANDAI official KAMEN RIDER toy information site

Updated: May 7, 2019

KAMEN RIDER Development Blog

MASKED RIDER FAIZ

Introducing the appearance and gimmicks of the Delta Mover!

Hello everyone, this is Funasen.

Blog update after the holidays.
Today we will be introducing you to the Delta Mover, part of the CSM Delta Gear!




As you may know, the DX version of the Delta Mover does not have any built-in electronic gimmicks. When you attach it to the Delta Phone, it presses a button on the phone and the sound on the phone changes.
When making this CSM, we decided that a mark projection gimmick was essential, just like the two previously released gears, so we decided to equip it with electronic parts, but we had trouble finding a way to make it compatible with the muzzle extension gimmick.

If we were to think about how a normal toy is made, we would install a switch at the part where the gun and the phone are combined to let the gun recognize that they have been combined. However, because the muzzle extends toward the opposite side of the part where it is combined, a space would be created between the phone and the muzzle, creating the problem of not being able to connect the electronic parts.

To overcome this challenge, the "wireless communication gimmick" that has always been featured in the CSM Faiz series is used.
The Deltaphone and Deltamover are extremely close to each other, in fact they are physically attached to each other, but they are linked by wireless communication rather than a switch.
The movable muzzle side is equipped with an LED, electronic board, and battery box, and when fully extended a radio connects the phone to the mover.



Once extended, it will enter pointer mode and you'll be able to unleash the special move "Lucifer's Hammer" by voice inputting "check."
Furthermore, CSM does not stop at recreating Lucifer's Hammer.
It is even possible to recreate the "gunfire only" special move scene depicted in episode 41!
You can recreate the series of scenes that were shown at the end of episode 40, including the simultaneous transformation of the three riders with background music playing, the battle with Lucky Clover at the beginning of episode 41, and the special move that is only available in this episode and is unleashed on Dragon Orphnoch.
Please check electronic manual on how to recreate this technique.

By the way, the muzzle of the Delta Mover is clear orange, but the projected delta mark is purple.
Normally, when you shine purple through clear orange, the color will change, but I would like to explain how we avoided this.
Please see the image below.



Of the three lens-shaped parts, only the part containing the LED is left colorless and transparent, and the inside of that is painted metallic orange. Although at first glance the entire lens appears orange due to the orange shining through the clear lens, the purple color of the LED does not discolor as it passes through the colorless and transparent lens part. In this way, we were able to overcome this challenge.


Finally, today, May 7th (Tuesday), is the deadline for pre-orders for the "DX Neo Diend Driver."
Please check this out too!!



That's all for today's blog.
The next update will be on Monday, May 13th.

Thank you very much.

商品情報


商品情報
share
X
Facebook
LINE

Related topics